GP type disc vacuum filter

GP type disc vacuum filter

Overview：
GP-type disc vacuum filter is the national "eight five" key scientific and technological projects during the project approved by the State Planning Commission in 1991, the task issued to the company and the coal preparation institute jointly developed, and in 1994 once through the Ministry of Coal Technical appraisal, the machine series of products have been the Ministry of Science and Technology Progress Award and the national key new product certification and Jiangsu Province, high-tech products that certificate.

I produced the GP series of flotation clean coal vacuum filter disc, fully learn from the advantages of similar foreign products, and constantly optimize the machine performance. Through the practical application of the product to prove the main technical and performance indicators have reached the domestic advanced level of similar products, with a low cake moisture, high filtration coefficient, small footprint, easy operation and maintenance advantages.

Disc vacuum filter Uses: Suitable for flotation coal or slime dehydration 技术Features:

1, the filter fan made of ultra-high strength polypropylene molded, high strength, easy to deformation, improve the service life of 2 to 3 times; fan aperture rate of up to 30%, so that it will not affect the filter due to clogging, and is conducive to Further increase production and reduce the moisture content of filter cake. 2, the filter fan Each disc consists of 20 18 ° angle fan-shaped plate composition, compared to each disk for the 12 fan-shaped plate, each fan-shaped plate in the suction area can be 12 ° in advance suction, in the drying area can Extended 12 ° for dehydration drying, it means that can have a higher yield, lower water.

3, friction plate, control panel with high anti-wear boron phosphorus cast iron casting, long service life.

4, the filter tube section, the distribution of head cavity volume, is conducive to improving the pumping rate and filtrate emissions.

5, for the viscous material, can be used "scraper + anti-hair" combination of discharge method, filter cake off rate.

6, the structure of the filtrate was optimized design, completely ruled out the original flange connection due to the aging of the rubber produced by the phenomenon of leakage.

7, the use of gear drive, frequency control, speed range, reliable operation.

8, stirring with VD-type seal, water seal, skeleton oil seal, the combination of multiple combinations of packing, long-term use does not leak pulp.

9, the use of dry oil pump centralized lubrication to ensure the normal operation of equipment.

10, the use of automatic cleaning cloth to maintain its good permeability, to maintain a good dehydration effect.